 |
|
CENTRIFUGAL:
Available from general service to slurry applications,
low NPSH, seal-less, self-priming, horizontal and
vertical design.
|
|
 |
|
PISTON/PLUNGER:
High-pressure positive displacement designed for
spray, injection, carwash and many other industrial
applications. |
 |
|
SUBMERSIBLE:
Sump pumps which are centrifugals in design for
removing liquids from pits, tanks and ponds. |
|
 |
|
GEAR:
Positive displacement self-priming pump designed
to handle a wide range of liquids such as: oils, acids,
solvents, molasses, and many others; both internal
and external designs. |
 |
|
TURBINES:
Turbine pumps are designed for clean, non-abrasive,
low viscosity liquids on low-flow/high head and low NPSH applications such as boiler feed, condensate
and NGL's.
|
|
 |
|
LOBE:
Sanitary, positive displacement, non-contact pump
for high and low viscosity liquids. Especially suited
for food and pharmaceuticals along with chemical and
industrial applications. Solids handling such as
beans, berries, and cellulose fibers. |
 |
|
SCREW:
Multiphase applications along with clean lubricating liquids.
|
|
 |
|
DIAPHRAM:
Self-priming, shear sensitive applications, that are
ideal for viscous and abrasive liquids driven by
electric, gas engine, and pneumatics. |
 |
|
FLEXIBLE IMPELLER:
Self-priming pump design capable of solids handling
and available in materials compatible with many mild and
corrosive liquids.
|
|
 |
|
PROGESSIVE CAVITY:
Handles slurry, shear sensitive, viscous and
abrasive liquids, self-priming, vertical and horizontal
designs. |
 |
|
METERING:
Precise dispensing of liquids with the ability of
varying flow rates for injection, water treatment,
corrosion and many others.
|
|
 |
|
LIQUID RING:
Ideally suited for handling oxygen and flammable
gases including deep vacuum and low discharge
applications with the use of oil and non-oil
lubricants. |
 |
|
PERISTALITIC:
Positive displacement, self-priming pump transfers
liquid by progressivly squeezing the tubing with
rollers; ideal for abrasive, viscous and corrosive fluids. |
|
 |
|
ROTARY LOBE:
Positive displacement using gear driven rotating
lobes creates a high volume air from a physically
small size unit. |
 |
|
VANE:
Propane and butane applications along with
non-lubricating products. Generally used on truck loading/unloading. |
|
 |
|
ROTARY VANE:
High air flow rates and high vacuum levels with
efficient recovery rates makes this design ideal for
vacuum trucks. |
